MARCH 2000 PRODUCT NEWS

• Mark-10 Corporation announces the availability of their new torque gauge consisting of the digital force/torque indicator Model BGI and the remote sensor Series STE.
• The new, SMX Deep Access RetroProbe400 enables laser trackers to perform accurate, precise, three-dimensional measurements of small pockets, holes, corners, punch marks, contours, crosshairs, scribed lines, and other large-parts features that are difficult or impossible to measure with a standard target or probe.
• From TTI, Tek Know PC700 Pressure Calibrator offers precision pressure calibration in any environment.
• The engineers at Dresser Instrument have improved the accuracy of the famous Heise Pressure Master (PM) digital indicator.
• Through the combination of a Max precision, positive displacement flow meter with a multi-point linearized display, Max Machinery, Inc. has developed the Series 720 portable calibrator.
• Using an isolated pressure sensor, the Series 625 Pressure Transmitter from Dwyer Instruments, Inc. measures liquids and compatible gasses with ±0.5% accuracy.
• Dresser Instrument's Heise PTE-1 handheld calibrator is now available in ±0.025% F.S. accuracy in ranges from 0-5 to 0-7,500 psi.
• The MicroCal PM 200 System by TTI is the most advanced, powerful and versatile portable indicator-simulator available on the market today for measurements and simulations of: millivolt, volt, milliampere (active and passive loop), ohm, temperature with thermocouples, temperature with resistance thermometers, frequency and pulse, and pressure.
• SMX Corp., the laser tracker company, has acquired Survey Instrument Systems, Inc. of Walled Lake, MI..
• From Dresser Instrument, the ultra-high accuracy pressure measurement in now possible with the Heise ST-2H digital indicator.
• From Pyrometer Instrument Co., the Pyrofiber, fiber optic, non-contact automatic emissivity correcting, IR Thermometer has been upgraded to incorporate a single digital and two analog outputs.
• Marking the first major redesign of a vacuum pump in more than 15 years, Nash Engineering will unveil a new line of vacuum pumps at their press conference at Interphex.
• The Promess Universal Calibration Meter (UCM) is designed for the calibration, certification, and verification of force and torque monitoring equipment used in assembly environments, manufacturing, and R&D labs.
• An advanced mP-based 2-wire Pt100 RTD temperature transmitter, specifically designed to be the industry's lowest-cost, full-featured unit, has been announced by S-Products Inc.
• Providing the most local of weather reports - on the factory floor, next to an air vent, off the bow of your boat - is the new multimode Model PWM3 Pocket Weather Meter from Dwyer Instruments, Inc.

eCalibration.com
PO Box 830 ~ State College, PA 16804
P: 800-982-2388 ~ P: 814-234-2417 ~ F: 814-234-7077
editor@ecalibration.com
News ~ Events ~ Directories ~ Careers ~ Resources ~ Global ~ Life Sciences ~ Home
Terms of Use ~ Privacy Statement
© Blue Mountain Quality Resources
eCalibration and The Premier Calibration Resource are Trademarks of Blue Mountain Quality Resources